Learning How To Build A Wind Generator Is Easier Than You Might Think
Life can be tough sometimes and you may be looking for ways to make it easier and less expensive. Since energy, especially electricity is one of you...
Life can be tough sometimes and you may be looking for ways to make it easier and less expensive. Since energy, especially electricity is one of your more costly everyday expenses, wouldn’t it be great if you could tap into the renewable energy that is all around you? Wind energy is already benefiting much of the world, so why can’t you take advantage of it, too? All you need is a wind generator. But do you know how to build a wind generator?
Glad you asked. Below are some basic guidelines to get you started:
- Location, location, location. You will need an open area with at least a three hundred to four hundred foot radius. You also need to watch for any obstacles overhead since the tower can reach 30 to 40 feet high. A tilt-up tower is best for low areas since they are closer to the ground. This also makes them easier to maintain. However, a free standing tower will maximize the output since it is taller and has fewer obstructions.
- Now you have to think about the materials you will need, beginning with the motor that will convert the wind energy into electricity. It needs to be a DC motor that is designed for high voltage, low rpm’s, and high current.
- Then comes the blades of the wind generator, which can be carved from plastic, wood, sheet metal or you could also use PVC pipes. Note that the longer the blades are, the wider its swept area covered, meaning the more power it can extract from the wind.
- Now you need to connect the blades to the motor using a hub. One of the simplest ways is to look for a scrap steel disk that you can drill holes in. Attach this to a shaft that will connect the blades.
- After this, the tail and the pivot are now to be put together to keep the apparatus turned to the wind. This can be done by using a square tubing, pipe nipple, flange for the pivot and a scrap metal sheet for the tail.
- Lastly, you need a place to store the converted energy so it is there even when the winds are calm. You do this with batteries. In order to monitor the charging, you should keep the generator and batteries as close together as possible. Look for low maintenance batteries that are highly efficient.
You need to look for special batteries called “deep cycle”, because they are rated in amp-hours and have indicators of their charge-discharge cycles. They are best for power system applications such as this.
In knowing how to build a wind generator it’s best to remember that placing a diode between the battery and the generator is good in order to prevent the energy from being wasted and flowing directly onto the generator itself. Adding a secondary load is helpful as a depot for excess energy produced.
Need help with DIY ? I know how you feel. Discover which do it yourself guides are simplist to follow and give you the most bang for your buck. Click here now:
Related posts:
- Home Wind Power Generator – A Basic Overview of this Alternative Source of Energy The interest in using alternative sustainable methods of supplying power...
- Residential Wind Generators Looking to reduce your power bill or start living without...
- Tips on How To Make Your Own Wind Turbine Every year the cost of energy increases dramatically. Most of...
- Cheap Wind Power Generators To Power Your Whole Home Power and fuel costs are rising, and many people are...
- Wind Power Solution – For Your Backyard Power and fuel costs are just starting to skyrocket, and...
Related posts brought to you by Yet Another Related Posts Plugin.